Save as PDF
Opens your browser print dialog — select "Save as PDF" to download.
Mining and Mine Surveying
Scheme OCBC 2019
MINE SURVEYING
The following consecutive readings were taken with a dumpy level and 4 m staff on a regular sloping ground at a maximum interval of 30 m. 0.500, 1.250, 1.750, 2.350, 2.750, 3.750, 0.950, 1.150, 2.450, 3.650, 1.250, 2.00, 2.375, 3.950
The R.L. of first point was 500.350 m. Rule out a page of a level book and enter the above reading calculate the R.L. of all points and find out the gradient of the line joining the first staff position and last staff position.
एक डम्पी लेवल तथा 4 मी. स्टाफ से निम्नलिखित क्रमागत पाठ्यांक एक नियमित ढाल सतह पर 30 मी. के समक्ष अंतराल पर लिए गये। 0.500, 1.250, 1.750, 2.350, 2.750, 3.750, 0.950, 1.150, 2.450, 3.650, 1.250, 2.00, 2.375, 3.950
प्रथम बिन्दु का समतल तल 500.350 मी. है। लेवल बुक का पेज के सभी खाने खींचकर सभी पाठ्यांक उसमे भरे। सभी बिन्दुओं के समतल तल ज्ञात कीजिए। तथा प्रथम व अंतिम स्टाफ स्थिति को मिलाने वाली रेखा का ढाल ज्ञात कीजिए।
The following consecutive readings were taken with a dumpy level
0.894, 1.643, 2.896, 3.016, 0.954, 0.692, 0.582, 0.251, 1.532, 0.996, 2.135
The instrument was shifted after the fourth and the eighth readings. The first reading was taken on the staff held on the bench mark of R.L. 820.765. What is the difference of level between the first and the last points?
निम्नलिखित क्रमागत पाठ्यांक को डम्पी लेवल के साथ लिये गये है।
0.894, 1.643, 2.896, 3.016, 0.954, 0.692, 0.582, 0.251, 1.532, 0.996, 2.135
चौथे एवं आठवे पाठ्यांक के बाद उपकरण को स्थानान्तरित कर दिया गया था। प्रथम पाठ्यांक आर.एल. 820.765 के बेंच मार्क पर रखे गये स्टाफ पर ली गयी थी। प्रथम एवं अंतिम बिन्दुओं के बीच के स्तर का अंतर क्या होगा।
a) Draw a sketch of contour showing the following.
- Pond
- Ridge and valley line
- Overhanging cliff
निम्नलिखित को समोच्च रेखाओं द्वारा चित्रित कीजिए
- झील
- पर्वत श्रेणी तथा घाटी रेखा
- ओवरहैंगिंग क्लिफ
b) Explain the process of direct method of locating contours.
समोच्च रेखाओं की स्थिति निर्धारण की प्रत्यक्ष विधि को समझाइए
a) Explain the following term.
- Contour line
- Stratum contours
- Grade contour
- Contour interval
निम्नलिखित पदों की व्याख्या कीजिए।
- समोच्च रेखा
- स्ट्रैटम कंटूर
- ग्रेड समोच्च
- समोच्च अन्तराल
b) Explain the method of contouring on flat ground.
समतल भूमि पर समोच्च रेखांकन की विधि को समझाइए
a) Describe the factors which affect the subsidence.
अवतलन को प्रभावित करने वाले कारकों क�� वर्णन कीजिये।
b) Describe how will you make survey of the area affected by ground subsidence due to mining.
खनन के कारण हुए अवतलन से प्रभावित क्षेत्र का सर्वेक्षण आप कैसे करेंगे वर्णन कीजिए।
a) State the purpose of subsidence survey.
अवतलन सर्वेक्षण के उद्देश्यों को बताइए।
b) Describe the method of measurement of horizontal movement in subsidence survey.
अवतलन सर्वेक्षण में क्षैतिज चाल के मापन की विधि का वर्णन कीजिए।
a) Describe the procedure of measuring vertical angle by theodolite.
थियोडोलाइट द्वारा ऊर्ध्वाधर कोण के मापन की प्रक्रिया का वर्णन कीजिए।
b) Explain clearly what would be the effect of index error on the vertical circle when measuring horizontal and vertical angles with theodolite. In this context, describe index error.
थियोडोलाइट द्वारा जब क्षैतिज और ऊर्ध्वाधर कोण का मापन किया जाता है तो ऊर्ध्वाधर वृत्त पर सूचकांक त्रुटि का क्या प्रभाव पड़ेगा। स्पष्ट रूप से बताइए।
a) Describe a method used for the measurement of horizontal angle in underground mine with a theodolite and make out booking of imaginary readings.
एक थियोडोलाइट के साथ भूमिगत खान में क्षैतिज कोण के मापन के लिये उपयोग की जाने वाली विधि का वर्णन कीजिए। एवं काल्पनिक पाठ्यांक की बुकिंग भी दर्शाइए।
b) Write short notes on .
- Residual errors
- Index error
निम्नलिखित संक्षिप्त टिप्पणी लिखिए।
- अवशिष्ट त्रुटि
- सूचकांक त्रुटि
a) Define the following term.
- Strike line
- Full dip
- Apparent dip
निम्नलिखित पदों को परिभाषित कीजिए।
- स्ट्राइक लाइन
- यथार्थ नति
- आभासी नति
b) Establish a relation between true dip, apparent dip and angle between them.
यथार्थ नति, आभासी नति एवं उनके बीच के कोण के बीच सम्बन्ध स्थापित कीजिए।
Three boreholes A, B and C have been put down in a coal seam, B is 1200 m due north from A and C is 750 m, N 65°W from A. The depth of A is 80 m if B 120 m and of C 95 m. The R.L. at the top of all the boreholes is the same. Calculate the direction and rate of full dip of the seam.
तीन बोरहोल A, B एवं C को किसी कोयले में संस्तर में किया गया है। B, A से उत्तर की ओर 1200 मीटर पर है। तथा C, A से उत्तर 65° पश्चिम दिशा में 750 मीटर पर है। A की गहराई 80 मी B की 120 मी तथा C की 95 मी. है। सभी बोरहोल के शीर्ष का समतल तल एक समान है। संस्तर के यथार्थ नति की दिशा एवं दर की गणना कीजिए।