Save as PDF

Opens your browser print dialog — select "Save as PDF" to download.

S/2023/6944
[2]
Total Pages: 4

Sixth Semester

Mechanical Engineering/RAC

Scheme OCBC 2019

POWER PLANT ENGINEERING

Time : Three Hours
Maximum Marks : 70

Note : 0 Attempt all 7 Questions are Compulsory. Internal choices

has been given in each L.O (Learning Outcome).

सभी 7 प्रश्न अनिवार्य हैं। आंतरिक विकल्प प्रत्येक L.O (लर्निंग आउटकम)

में दिए गए हैं।

ii) In case of any doubt or dispute, the English version question

should be treated as final.

किसी भी प्रकार के संदेह अथवा विवाद की स्थिति में अंग्रेजी भाषा के

प्रश्न को अंतिम माना जायेगा।

Q. LO Questions Marks
1.

Discuss the factors which should be considered while selecting a site for a hydroelectric power plant and classification of hydroelectric power plant.

उन कारकों पर चर्चा करें जिन पर जलविद्युत ऊर्जा संयंत्र के लिए एक साइट का चयन करते समय और जलविद्युत ऊर्जा संयंत्र के वर्गीकरण पर विचार किया जाना चाहिए।

OR/अथवा

Explain the safe disposal of nuclear waste and enlist the advantages, disadvantages of nuclear power plant.

परमाणु अपशिष्ट के सुरक्षित निपटान की व्याख्या करें और परमाणु ऊर्जा संयंत्र के फायदे, नुकसान को सूचीबद्ध करें।

10
2.

Explain the construction and working of steam power plant elements using neat sketches?

स्वच्छ स्केच का उपयोग करके भाप शक्ति संयंत्र तत्वों के निर्माण और कार्यप्रणाली की व्याख्या करें।

OR/अथवा

Write short notes on Fuel handling system of steam power plant.

भाप शक्ति संयंत्र के ईंधन हैंडलिंग प्रणाली पर संक्षिप्त टिप्पणी लिखें।

10
3.

Explain the effect of load variation in steam power plant.

भाप शक्ति संयंत्र में लोड भिन्नता के प्रभाव की व्याख्या करें।

OR/अथवा

Define the term instrumentations used in modern power plant.

आधुनिक शक्ति संयंत्र में उपयोग किए जाने वाले पद इंस्ट्रूमेंटेशन को परिभाषित करें।

10
4.

Enlist the disadvantages of gas turbine power plant over other power plant.

अन्य शक्ति संयंत्र पर गैस टरबाइन पावर प्लांट के नुकसान को सूचीबद्ध करें।

OR/अथवा

A gas turbine has an overall pressure ratio of 5 and a maximum cycle temperature of 550°C. The turbine drives the compressor and an electric generator, the mechanical efficiency of the drive being 97%. The ambient temperature is 20°C and the air enters the compressor at the rate of 15 kg/s: the isentropic efficiencies of the compressor and the turbine are 80 and 83%. Neglecting changes in Kinetic energy, the mass flow rate of fuel and all pressure losses. Calculates:

a) The power output

b) The cycle efficiency

एक गैस टरबाइन का समग्र दबाव अनुपात 5 और अधिकतम चक्र तापमान 550°C होता है। टरबाइन कंप्रेसर और एक इलेक्ट्रिक जनरेटर चलाता है, ड्राइव की यांत्रिक दक्षता 97% है। परिवेश का तापमान 20°C है और हवा 15 kg/s की दर से कंप्रेसर में प्रवेश करती है। कंप्रेसर और टरबाइन की आइसेंट्रोपिक दक्षता 80 और 83% है।

गतिज ऊर्जा में परिवर्तन, ईंधन की द्रव्यमान प्रवाह दर, और सभी दबाव हानि की उपेक्षा करना।

गणना:

a) निर्मित शक्ति

b) चक्र दक्षता

10
[3]
Q. LO Questions Marks
5.

A gas turbine power plant operates on the Joule cycle. The air in the plant is compressed at a pressure of 1 kg/cm2 and a pressure ratio of 6 at 17°C temperature and it is heated in the combustion chamber at 700°C and circulates backward with a pressure of 1 km/cm2. Find the following.

a) Cycle efficiency

b) Work ratio

c) Specific work output of the plant

एक गैस टरबाइन शक्ति संयंत्र जूल चक्र के अनुसार कार्य करता है। संयंत्र में वायु का संपीड़न 1 किग्रा/सेमी2 दाब तथा 17°C तापमान पर दाब अनुपात 6 के द्वारा होता है तथा यह दहन कक्ष में 700°C पर गर्म होती है और 1 किमी/सेमी2 के दाब से पाच प्रसारित होती है। निम्न को ज्ञात करो

a) चक्र दक्षता

b) कार्य अनुपात

स) संयंत्र का विशिष्ट कार्य निर्मित (Work output)

OR/अथवा

In a power plant, the steam from the boiler reaches the turbine at a temperature of 700°C. The spent steam leaves the turbine at 100°C. Calculate the maximum efficiency of the turbine.

एक पावर प्लांट में, बॉयलर से भाप 700°C के तापमान पर टरबाइन तक पहुँचती है। खर्च की गई भाप टरबाइन को 100°C पर छोड़ देती है। टरबाइन की अधिकतम दक्षता की गणना कीजिए।

10
6.

Describe the classification of hydraulic turbines in different categories.

विभिन्न श्रेणियों में हाइड्रोलिक टरबाइनो के वर्गीकरण का वर्णन करें।

OR/अथवा

Write the classification of hydroelectric power plant.

जलविद्युत ऊर्जा संयंत्र का वर्गीकरण लिखें।

10
7.

Write short notes on capital and operating cost of different power plants.

विभिन्न शक्ति संयंत्रों की पूंजी और परिचालन लागत पर संक्षिप्त टिप्पणी लिखें।

OR/अथवा

A 100 watt input into a 100-watt light bulb is 100 watts. The output is 2130 lumens. Determine the efficiency of the light bulb (Note: One lumen is equivalent to 0.001496 watts.)

100 वाट के प्रकाश बल्ब में ऊर्जा इनपुट 100 वाट है। आउटपुट 2130 लुमेन है। प्रकाश बल्ब की दक्षता ज्ञात कीजिये। (नोट: एक लुमेन 0.001496 वाट के बराबर है।)

10