Save as PDF
Opens your browser print dialog — select "Save as PDF" to download.
S/2025/6938
Total Pages : 4
Fifth Semester
Mechanical Engineering
Scheme OCBC 2019
THEORY OF MACHINE
Time : Three Hours
Maximum Marks : 70
Note : i) All 7 Questions are Compulsory. Internal choices has been given in each LO (Learning Outcome)
सभी 7 प्रश्न अनिवार्य हैं। आंतरिक विकल्प प्रत्येक LO (लर्निंग आउटकम) में दिए गए हैं।
ii) In case of any doubt or dispute, the English version question should be treated as final.
किसी भी प्रकार के संदेह अथवा विवाद की स्थिति में अंग्रेजी भाषा के प्रश्न को अंतिम माना जायेगा।
| Q. | LO | Questions | Marks |
|---|---|---|---|
| 1. |
a) Differentiate between machine and mechanism.
यंत्र एवं यंत्र विन्यास में अन्तर स्पष्ट कीजिए।
|
5 | |
|
b) Differentiate between a higher pair and lower pair with examples.
उच्च युगल एवं निम्न युगल में उदाहरण सहित अन्तर स्पष्ट कीजिए।
OR/अथवा
|
5 | ||
|
Sketch and explain the various inversions of a slider crank chain.
सरल क्रेन्क चैन के विभिन्न उत्क्रमणों को चित्र बनाकर समझाइये।
|
10 | ||
| 2. |
Write the differentiate between open belt and cross belt, with neat sketch.
खुला पट्टा और क्रॉस पट्टा में स्वच्छ चित्र की सहायता से अन्तर स्पष्ट कीजिए।
OR/अथवा
|
10 | |
|
Derive the expression for maximum power transmission through belt drive.
बेल्ट द्वारा पारेषित अधिकतम शक्ति के व्यंजन की स्थापना कीजिए।
|
10 | ||
| 3. |
A flat belt is moving on a pulley of 600 mm diameter at 200 rpm. Coefficient of friction between belt and pulley is 0.25 and angle of lap is 160°. If the maximum tension in a belt is 2.5kN. Calculate the power transmitted through the belt.
एक सपाट पट्टा 600 मिमी व्यास की घिरनी पर 200 च.प्र.मि. की गति से घूम रहा है। पट्टा एवं घिरनी के मध्य घर्षण गुणांक 0.25 एवं छादन कोण 160° है। यदि पट्टे में अधिकतम खिंचाव 2.5 कि.न्यूटन हो तो पट्टे द्वारा पारेषित शक्ति की गणना कीजिए।
OR/अथवा
|
10 | |
|
Explain the various modes of power transmitted from one shaft to another and compare them.
एक शाफ्ट से दूसरी शाफ्ट पर शक्ति संचरण की विभिन्न प्रणालियों को समझाइये एवं उनमें अंतर स्पष्ट कीजिए।
|
10 | ||
| 4. |
A cam drives a knife edge follower lifting it through 30mm during 150° of cam rotation. After dwell of 60°, the follower returns during 100° of cam rotation. The remaining period is dwell for follower the minimum radius of cam is 20mm. The follower moves in S.H.M. during lift and return draw cam profile.
एक कैम, धुरधार फालोअर को 30 मिमी से उठाती है, जबकि कैम 150° घूमता है। स्थिरता 60°, होने के बाद फालोअर कैम के 100° घूमने पर वापस लौटता है। बची हुई कैम घूमने में फालोअर स्थिर रहता है। कैम की न्यूनतम त्रिज्या 20 मिमी है। फालोअर का वेग ऊपर जाते समय एवं वापसी में सरल आवर्त गति में है। कैम प्रोफाइल बनाइये।
OR/अथवा
|
10 | |
|
Discuss various types of followers in details.
फालोअर्स के प्रकारों को विस्तार से समझाइये।
|
10 | ||
| 5. |
Explain flywheel and governor in details.
फ्लाईव्हील और गवर्नर को विस्तार से परिभाषित कीजिए।
OR/अथवा
|
10 | |
|
Define following terms:
i) Hunting
ii) Sensitivity
iii) Isochronism
iv) Stability
निम्नलिखित पदों को परिभाषित कीजिए।
i) हंटिंग
ii) सुग्राहिता
iii) आइसोक्रोनिज्म
iv) स्थिरता
|
10 | ||
| 6. |
What are the different types of vibration? Explain each of them in brief.
विभिन्न प्रकार के कम्पन क्या है। प्रत्येक को संक्षेप में समझाइये।
OR/अथवा
|
10 | |
|
Discuss harmful effects of vibration and their remedies in details.
कम्पन के हानिकारक प्रभावों एवं उनके उपायों को विस्तार से समझाइये।
|
10 | ||
| 7. |
Explain the working and use of governor.
अभियंत्रक के कार्यसिद्धान्त को समझाइये एवं इसके अनुप्रयोग लिखिए।
OR/अथवा
|
10 | |
|
Describe the working of rope brake dynamometer with neat sketch.
स्वच्छ चित्र की सहायता से रोप ब्रेक डायनामोमीटर के कार्य सिद्धान्त का वर्णन कीजिए।
|
10 |