Save as PDF
Opens your browser print dialog — select "Save as PDF" to download.
Third Semester
Electrical Engineering/Mining and Mine Surveying and Cement Technology
Scheme OCBC 2019
GENERAL MECHANICAL ENGINEERING
Note :
i) All 7 Questions are Compulsory. Internal choices has been given in each LO (Learning Outcome)
सभी 7 प्रश्न अनिवार्य हैं। आंतरिक विकल्प प्रत्येक LO (लर्निंग आउटकम) में दिए गए हैं।
ii) Use of Steam table and Mollier chart is permitted.
स्टीम टेबल एवं मोलियर चार्ट के प्रयोग की अनुमति है।
iii) In case of any doubt or dispute, the English version question should be treated as final.
किसी भी प्रकार के संदेह अथवा विवाद की स्थिति में अंग्रेजी भाषा के प्रश्न को अंतिम माना जायेगा।
a) What is Alloy steel? Give the composition of high speed steel? Where is it used?
एलाय इस्पात क्या होता है? उच्च गति इस्पात की संरचना बताइए। इसका उपयोग कहाँ किया जाता है?
b) Write the composition of the following substances.
निम्नलिखित पदार्थों के संघटन को लिखिए।
i) Monel metal
i) मोनल धातु
ii) German silver
ii) जर्मन सिल्वर
iii) Cartridge brass
iii) काट्रिज ब्रास
iv) Bell metal
iv) घंटा धातु
v) Hindalium
v) हिन्डेलियम
OR/अथवा
a) Define the following mechanical properties of material:
पदार्थ के निम्नलिखित यांत्रिक गुणों को परिभाषित कीजिये।
i) Brittleness
i) भंगुरता
ii) Toughness
ii) चीमड़पन
iii) Strength
iii) सामर्थ्य
b) Describe how compression test is carried on universal testing machine with neat sketch.
सार्वत्रिक तनन परीक्षण मशीन पर होने वाले संपीडन परीक्षण का वर्णन स्वच्छ चित्र की सहायता से वर्णन कीजिये।
a) Draw a neat sketch of the Cochran boiler and label its parts.
कोकरन बॉयलर का स्वच्छ चित्र बनाकर इसके भागों को लेबल कीजिये।
b) Define system and explain different types of systems by giving one example each.
निकाय की परिभाषा दीजिये तथा विभिन्न प्रकार के निकायों को एक-एक उदाहरण देकर समझाइये।
OR/अथवा
a) Explain both the statements of the second law of thermodynamics.
ऊष्मागतिकी के द्वितीय नियम के दोनों कथनों को समझाइये।
b) Find the saturated temperature, change in specific volume during evaporation and the value of latent heat of vaporization of steam at 10 bar pressure.
10 bar दाब पर भाप का संतृप्त तापमान, वाष्पन के दौरान विशिष्ट आयतन में परिवर्तन तथा वाष्पन की गुप्त ऊष्मा का मान ज्ञात कीजिये।
a) Give the classification of air compressor.
वायु संपीडक का वर्गीकरण दीजिये।
b) Explain with the help of neat sketch, construction and working of a two-stroke diesel cycle engine.
स्वच्छ चित्र की सहायता से, द्वि-स्ट्रोक डीजल चक्र इंजन का निर्माण एवं कार्यपद्धति को समझाइये।
OR/अथवा
a) Difference between internal combustion engine and steam engine.
आन्तरिक दहन इंजन तथा भाप इंजन में अंतर स्पष्ट कीजिये।
b) Explain the working principle of a rotary air compressor with the help of a neat diagram.
स्वच्छ चित्र की सहायता से घूर्णी वायु संपीडन का कार्यसिद्धांत समझाइये।
a) Calculate the density, specific weight and weight of one liter of petrol whose specific gravity is 0.75.
एक लीटर पेट्रोल के घनत्व, आपेक्षिक भार तथा भार की गणना कीजिये जिसका आपेक्षिक गुरुत्व 0.75 है।
b) The velocity of water at a height of 55 m above sea level is 25 m/s and the pressure is 3.5 bar. Considering sea level as the baseline, find the total energy of one Newton of water.
समुद्र तल से 55 मीटर ऊँचाई पर पानी की गति 25 मीटर/सेकंड है तथा दाब 3.5 बार है। समुद्र तल को आधार रेखा मानते हुए एक न्यूटन पानी की सम्पूर्ण ऊर्जा ज्ञात कीजिये।
OR/अथवा
A tapering horizontal is discharging at the rate of 40 litres/sec. The diameter of the pipe at entry is 200 mm, 5.5 m above the ground and the diameter at the exit is 100 mm, 3.5 m above the ground. If water enters the pipe at a pressure of 0.3924 N/mm² then find the water pressure at the exit.
एक क्षीणकार पाइप में से 40 लीटर/सेकंड की दर से विसर्जन हो रहा है। पाइप का प्रवेश पर व्यास 200 mm है, जमीन से 5.5 m ऊपर है तथा निकास पर व्यास 100 mm है, जमीन से 3.5 m ऊपर है। यदि पानी 0.3924 N/mm² के दाब पर पाइप में प्रवेश करता है तो निकास पर पानी का दाब ज्ञात कीजिये।
a) Define hydraulic machine with example.
द्रव चलित मशीनों को उदाहरण सहित परिभाषित कीजिये।
b) Describe the construction and working of reaction water turbine with neat sketch.
स्वच्छ चित्र की सहायता से प्रतिक्रिया जल टरबाइन की संरचना तथा कार्यसिद्धांत का वर्णन कीजिये।
OR/अथवा
a) Why is reciprocating pump called a positive displacement pump?
प्रत्यागामी पम्प को क्यों धनात्मक विस्थापन पम्प कहा जाता है?
b) Describe the construction and working of reciprocating pump with neat sketch.
स्वच्छ चित्र की सहायता से प्रत्यागामी पम्प की संरचना तथा कार्यसिद्धांत का वर्णन कीजिये।
a) Write the advantages and disadvantages of V-belt over flat belt.
चपटे पट्टे की अपेक्षा V-पट्टे के लाभ तथा हानियाँ लिखिए।
b) Define gear chain and classify gear chain.
गियर माला को परिभाषित कीजिये एवं गियर माला का वर्गीकरण कीजिये।
OR/अथवा
a) Write down the advantages and disadvantages of a gear drive.
गियर चालन के लाभ तथा हानियाँ लिखिए।
b) What do you understand by drive? How can drive be classified?
चालन के आप क्या समझते है? चालन को किस प्रकार वर्गीकृत किया जा सकता है?
An engine is rotating at 200 rpm with the help of a belt. The diameter of the engine pulley is 650 mm and this pulley is connected with the help of a belt to a 500 mm diameter pulley mounted on a line shaft. Another pulley is fitted on this line shaft whose diameter is 1000 mm. A 250 mm pulley mounted on a dynamo shaft is connected to this pulley with the help of a belt. Find the speed of the dynamo shaft, when
एक इंजन पट्टे की सहायता से 200 चक्कर प्रति मिनट पर घूम रही है। इंजन पुली का व्यास 650 मिमी. तथा इस पुली को पट्टे की सहायता से एक लाइन शाफ्ट पर लगी 500 मिमी. व्यास की पुली से जोड़ा गया है। इस लाइन शाफ्ट पर एक और पुली लगी हुई है जिसका व्यास 1000 मिमी. है। इस पुली से पट्टे की सहायता से एक डाइनामो शाफ्ट पर लगी 250 मिमी. की पुली को जोड़ा गया है। डाइनामो शाफ्ट की गति ज्ञात करो, जब
i) there is no slip
i) कोई फिसलन नहीं है
ii) the slip is 2.5% at each drive.
ii) फिसलन प्रत्येक चालन पर 2.5% हो।
OR/अथवा
a) Write the law of gearing.
गियरिंग का नियम लिखिए।
b) Calculate the speed of the driving shaft in a compound gear train, if the number of teeth of the driving gears are 50, 60, 80 and 100 and the number of teeth of the driven gears are 18, 40, 60 and 80. The speed of the driven shaft is 150 rpm.
संयुक्त गियर ट्रेन में चालक शाफ्ट की गति की गणना करें, यदि चालक गियरों के दाँतों की संख्या 50, 60, 80 और 100 हैं और चालित गियरों के दाँतों की संख्या 18, 40, 60 और 80 है। चालित शाफ्ट की गति 150 चक्कर प्रति मिनट है।