Save as PDF
Opens your browser print dialog — select "Save as PDF" to download.
F/2024/6840
Total Pages : 6
Third Semester
Electrical Engineering/Electrical and Electronics Engg.
Scheme OCBC 2019
DC MACHINES AND TRANSFORMERS
Time : Three Hours
Maximum Marks : 70
Note : i) All 7 Questions are Compulsory. Internal choices has been given in each LO (Learning Outcome).
Note : i) सभी 7 प्रश्न अनिवार्य हैं। आंतरिक विकल्प प्रत्येक LO (लर्निंग आउटकम) में दिए गए हैं।
Note : ii) In case of any doubt or dispute, the English version question should be treated as final.
Note : ii) किसी भी प्रकार के संदेह अथवा विवाद की स्थिति में अंग्रेजी भाषा के प्रश्न को अंतिम माना जायेगा।
| Q. | LO | Questions | Marks |
|---|---|---|---|
| 1. | LO11 |
a) Draw neat sketch of DC machine showing its main parts and explain in brief function of each part with material by which it is made of.
a) दिष्ट धारा मशीन का उसका मुख्य भागों को दर्शाते हुऐ स्वच्छ चित्र बनाइये और इसके मुख्य भागों का कार्य संक्षेप में समझाइये, प्रत्येक भाग जिस पदार्थ का बना है, को भी बताइये।
|
6 |
| LO11 |
b) Explain armature reaction and commutation in brief.
b) आर्मेचर प्रतिक्रिया और दिकपरिवर्तन को संक्षेप में समझाइये।
OR/अथवा
|
||
| LO11 |
a) Differentiate between lap winding and wave winding.
a) लैप कुण्डलन और तरंग कुण्डलन के बीच अंतर स्पष्ट कीजिए।
|
6 | |
| LO12 |
b) Derive emf equation of dc generator.
b) दिष्ट धारा जनित्र के विद्युत वाहक समीकरण की व्युत्पत्ति कीजिए।
|
||
| 2. | LO11 |
a) Describe the methods of improving commutation.
a) दिकूपरिवर्तन को सुधारने की विधियों का वर्णन कीजिए।
|
4 |
| LO12 |
b) A lap wound dc shunt generator having 80 slots with 10 conductors per slot, generates at no load an emf of 400 volt, when running at 1000 rpm. At what speed should it be rotated to generate a voltage of 220V on open circuit.
b) एक लैप कुण्डलित दिष्ट धारा शंट जनरेटर के आर्मेचर में 80 खांचे है और प्रत्येक खांचे में 10 चालक है, यह निर्भार पर 1000 rpm पर घूमते हुये 400 वोल्ट उत्पन्न करता है। खुले परिपथ पर 220 वोल्ट उत्पन्न करने के लिये इसे किस गति पर घुमाया जाना चाहिये, ज्ञात कीजिए।
OR/अथवा
|
6 | |
| LO12 |
a) Describe the various losses occurred in the dc machine and state the applications of dc series and shunt generator.
a) दिष्ट धारा मशीन में होने वाली विभिन्न हानियों का वर्णन कीजिए तथा दिष्ट धारा श्रेणी व शंट जनरेटर के उपयोग बताइये।
|
4 | |
| LO12 |
b) A long shunt compound generator delivers a load current of 50A at 500V and the resistances of armature, series field and shunt fields are 0.05Ω, 0.03Ω and 250Ω respectively. Calculate the generated emf and armature current. Allow 1 volt per brush for contact drop.
b) एक दीर्घ शंट मिश्र जनरेटर 500 वोल्ट पर 50A की भार धारा प्रदान करता है, और इसके आर्मेचर, श्रेणी क्षेत्र एवं शंट क्षेत्र प्रतिरोधों के मान क्रमशः 0.05Ω, 0.03Ω एवं 250Ω हैं। जनित विद्युत वाहक बल और आर्मेचर धारा का मान ज्ञात कीजिए। ब्रश सम्पर्क ड्रॉप प्रति ब्रश 1 वोल्ट अनुज्ञेय है।
|
6 | |
| 3. | LO21 |
a) Explain working principle of DC motor and classify dc motors.
a) दिष्ट धारा मोटर का कार्यसिद्धान्त समझाइये और दिष्ट धारा मोटरों का वर्गीकरण कीजिए।
|
4 |
| LO21 |
b) Derive torque equation of DC motor.
b) दिष्ट धारा मोटर के लिये बल आघूर्ण समीकरण की व्युत्पत्ति कीजिए।
OR/अथवा
|
6 | |
| LO21 |
a) What is back emf? Explain its significance.
a) पश्च विद्युत वाहक बल क्या है? इसके महत्व को समझाइये।
|
4 | |
| LO22 |
b) Describe construction and working of BLDC motor with its applications.
b) ब्रश रहित दिष्ट धारा मोटर (BLDC) की संरचना और कार्यप्रणाली का इसके उपयोगों सहित वर्णन कीजिए।
|
6 | |
| 4. | LO22 |
a) Explain in brief why a DC series motor should not be started at no load?
a) संक्षेप में समझाइये कि क्यों एक दिष्ट धारा श्रेणी मोटर को निर्भार पर प्रारम्भ नहीं करना चाहिए ?
|
3 |
| LO22 |
b) Explain the need of starter for DC motor and describe the working of 3-point starter with neat diagram.
b) दिष्ट धारा मोटर के लिये स्टार्टर की आवश्यकता को समझाइये और तीन बिन्दु प्रारम्भक की कार्यप्रणाली का स्वच्छ चित्र बनाकर वर्णन कीजिए।
OR/अथवा
|
7 | |
| LO22 |
a) A 250V dc shunt motor having an armature resistance of 0.25Ω, carries an armature current of 50A and runs at 750 rpm. If the flux is reduced by 10%, find the speed? Assume that the load torque remains the same.
a) एक 250V दिष्ट धारा शंट मोटर के आर्मेचर का प्रतिरोध 0.25Ω है और यह 750 rpm पर घूमते हुये 50A की आर्मेचर धारा लेती है। यदि फ्लक्स का मान 10% कम कर दिया जाए तो (तब) गति का मान ज्ञात कीजिए। मान लीजिए कि भार बल आघूर्ण का मान अपरिवर्तित रहता है।
|
5 | |
| LO31 |
b) Explain construction and working principle of transformer with diagram. (1-phase)
b) एक फेज ट्रांसफॉर्मर की संरचना और कार्यसिद्धान्त को स्वच्छ चित्र सहित समझाइये।
|
5 | |
| 5. | LO31 |
a) Derive the emf equation of transformer (1-phase).
a) एक कला परिणामित्र के विद्युत वाहक बल समीकरण की व्युत्पत्ति कीजिए।
|
5 |
| LO32 |
b) Draw equivalent circuit of 1-phase transformer when its secondary referred to primary side.
b) एककला फेज ट्रांसफॉर्मर का तुल्य परिपथ बनाइये जब इसकी द्वितीयक कुण्डलन को प्राथमिक की तरफ निर्देशित किया गया हो।
OR/अथवा
|
5 | |
| LO32 |
a) Draw explain phasor diagram of 1-phase transformer on load, at leading p.f. load.
a) एक फेज ट्रांसफॉर्मर का भार पर अग्रगामी शक्ति गुणांक भार के लिये सदिश आरेख खींचिए और समझाइये।
|
5 | |
| LO32 |
b) A 40 kVA single-phase transformer has an iron losses of 800 W and copper losses of 1200 W when supplying its full load at unity p.f. calculate the efficiency of the transformer at unity p.f. at full load and half load?
b) एक 40 kVA के एक फेज ट्रांसफॉर्मर की लौह हानियां 800 W तथा पूर्ण भार व इकाई शक्ति गुणांक पर ताम्र हानियां 1200 W है। इस ट्रांसफॉर्मर की इकाई शक्ति गुणांक पर पूर्ण भार दक्षता एवं अर्द्ध भार दक्षता ज्ञात कीजिए।
|
5 | |
| 6. | LO32 |
a) Define voltage regulation and all day efficiency of 1-phase transformer.
a) एक फेज ट्रांसफॉर्मर के वोल्टता नियमन और पूर्ण दिवस दक्षता को परिभाषित कीजिए।
|
3 |
| LO41 |
b) Compare single unit of 3-phase transformer with bank of three-single phase transformers.
b) एक तीन फेज परिणामित्र की एक यूनिट को 3-एकल फेज परिणामित्रों की बैंक से तुलना कीजिए।
OR/अथवा
|
7 | |
| LO41 |
a) Explain working of scott connection of 3-phase transformers with neat diagram.
a) तीन फेज ट्रांसफॉर्मर के स्कॉट संयोजन की कार्यप्रणाली स्वच्छ डायग्राम बनाकर समझाइये।
|
6 | |
| LO42 |
b) Explain the need of parallel operation and the necessary conditions to operate three-phase transformers in parallel.
b) तीन फेज ट्रांसफॉर्मर के समांतर में प्रचालन की आवश्यकता को समझाइये और तीन फेज ट्रांसफॉर्मरों के समांतर में प्रचालन की आवश्यक शर्त बताइये।
|
4 | |
| 7. | LO42 |
a) List the cooling methods of 3-phase transformers explain any one of them.
a) तीन फेज ट्रांसफॉर्मर के शीतलीकरण की विधियों की सूची बनाइये और किसी एक विधि को समझाइये।
|
4 |
| LO51 |
b) Describe the construction and working of single-phase auto-transformer with neat diagram states its uses also.
b) एकल कला स्व-परिणामित्र की संरचना और कार्यविधि का स्वच्छ चित्र सहित वर्णन कीजिए। इसके उपयोग को बताइये।
OR/अथवा
|
6 | |
| LO51 |
a) Describe the constructional features of isolation transformer and state its uses.
a) आइसोलेशन ट्रांसफॉर्मर की संरचनात्मक विशेषताओं का वर्णन कीजिए तथा इसके उपयोग बताइये।
|
5 | |
| LO52 |
b) Draw neat circuit diagram of CT and PT.
b) CT और PT का स्वच्छ परिपथ आरेख खींचिए।
|
3 | |
|
c) State applications of
i) CT and PT ii) Pulse transformer c) निम्न के उपयोग बताइये। i) CT और PT ii) पल्स ट्रांसफॉर्मर |
2 |