Save as PDF
Opens your browser print dialog — select "Save as PDF" to download.
Fifth Semester
Electrical Engineering
Scheme OCBC 2019
ESTIMATION, COSTING AND CONTRACTING
Note : i) All 7 Questions are Compulsory. Internal choices has been given in each LO (Learning Outcome)
सभी 7 प्रश्न अनिवार्य हैं। आंतरिक विकल्प प्रत्येक LO (लर्निंग आउटकम) में दिए गए हैं।
ii) In case of any doubt or dispute, the English version question should be treated as final.
किसी भी प्रकार के संदेह अथवा विवाद की स्थिति में अंग्रेजी भाषा के प्रश्न को अंतिम माना जायेगा।
| Q. | LO | Questions | Marks |
|---|---|---|---|
| 1. | LO1 |
a)
Write about the charges which are essential for each estimate.
प्रत्येक प्राक्कलन के लिए आवश्यक व्ययों का वर्णन कीजिए। |
6 |
| LO9 |
b)
How will you determine the input current to an 1 phase A.C. motor?
एक कला ए.सी. मोटर की इनपुट धारा का मान आप कैसे ज्ञात करेंगे? |
4 | |
OR/अथवा |
|||
| LO1 |
a)
Define rough estimate, detailed estimate and supplementary estimate.
अनुमोद अनुमान, विस्तृत अनुमान और पूरक अनुमान को परिभाषित करें। |
6 | |
| Q. | LO | Questions | Marks |
|---|---|---|---|
| 2. | LO9 |
b)
How will you determine the input current to an 1 phase A.C. motor?
3 कला ए.सी. मोटर की इनपुट धारा का मान आप कैसे ज्ञात करेंगे? |
4 |
| LO5 |
a)
Draw the diagram for pipe earthing as per I.S.S. code.
I.S.S. कोड के अनुसार पाइप अर्थिंग का चित्र खींचिए। |
6 | |
| LO5 |
b)
Write ten different lighting accessories with specification.
दस विभिन्न लाइटिंग एक्सेसरीज को स्पेसिफिकेशन के साथ लिखिए। |
4 | |
OR/अथवा |
|||
| LO5 |
a)
State the important facts, which an estimator should know for preparing a residential wiring estimate.
वे प्रमुख तथ्य बताइए जो एक प्राक्कलनकर्ता को एक आवासीय वायरिंग प्राक्कलन तैयार करते समय जानने चाहिए। |
6 | |
| LO5 |
b)
Explain the various types of wiring systems.
विभिन्न प्रकार के वायरिंग सिस्टम को समझाइए। |
4 | |
| 3. | LO5-a |
a)
A two room house each of size 3m × 4m × 3m each room has 2 light points, 2 plug points and a fan point. Estimate the cost of wiring materials.
एक मकान के दो कमरे 3m × 4m × 3m आकार के हैं जिसमें प्रत्येक कमरे में 2 प्रकाश बिन्दु, 2 प्लग बिन्दु और एक पंखा बिन्दु लगा है। वायरिंग सामग्री के मूल्य का प्राक्कलन कीजिए। |
10 |
| Q. | LO | Questions | Marks |
|---|---|---|---|
| LO14 |
b)
Explain differences between wire and cable.
तार और केबल के बीच अंतर स्पष्ट करें। |
3 | |
OR/अथवा |
|||
| LO5 |
a)
A three room house each of size 3m × 4m × 3m each room has 2 light points, 2 plug points and a fan point. Estimate the cost of wiring materials.
एक भवन के तीन कमरे 3m × 4m × 3m आकार के है। जिसमें प्रत्येक कमरे में 2 प्रकाश बिन्दु, 2 प्लग बिन्दु और एक पंखा बिन्दु और एक पंखा बिन्दु लगाना है। वायरिंग सामग्री के मूल्य का प्राक्कलन कीजिए। |
7 | |
| LO14 |
b)
Explain various methods of cable laying.
केबल बिछाने की विभिन्न विधियों की व्याख्या कीजिए। |
3 | |
| 4. | LO9 |
a)
Wiring is to be done for a workshop of size 10m × 6m × 4m × 3m height. Draw the layout and estimate the quantity of materials required and the cost of complete wiring for installing a 20 H.P, 3 phase, 400 V, 50 Hz induction motor. Assume required data. Take height of MDB 1.5m and motor control board 1m away from wall of right side.
एक वर्कशॉप वायरिंग कीजिए जबकि वर्कशॉप का आकार 6 मी. × 4 मी. × 3 मी. है। वर्कशॉप में एक 10 हॉर्स पॉवर, 3 फेज़, 400 वोल्ट, 50 हर्त्ज़ की प्रेरणा मोटर स्थापन के लिए आवश्यक सामग्री की मात्रा एवं पूरी वायरिंग लागत का आकलन कीजिए। आवश्यक डाटा मानकर एवं मेन बोर्ड की ऊँचाई 1.5 मीटर एवं मोटर कन्ट्रोल बोर्ड दाहिनी ओर की दीवार से एक मीटर की दूरी पर है। |
10 |
OR/अथवा |
|||
| LO9 |
a)
Wiring is to be done for a workshop of size 10m × 6m × 4m × 3m height. Draw the layout and estimate the quantity of materials required and the cost of complete wiring for installing a 20 H.P, 3 phase, 400 V, 50 Hz induction motor. Assume required data. Take height of MDB 1.5m and motor control board 1m away from wall of right side.
एक वर्कशॉप वायरिंग कीजिए जबकि वर्कशॉप का आकार 6 मी. × 4 मी. × 3 मी. है। वर्कशॉप में एक 10 हॉर्स पॉवर, 3 फेज़, 400 वोल्ट, 50 हर्त्ज़ की प्रेरणा मोटर स्थापन के लिए आवश्यक सामग्री की मात्रा एवं पूरी वायरिंग लागत का आकलन कीजिए। आवश्यक डाटा मानकर एवं मेन बोर्ड की ऊँचाई 1.5 मीटर एवं मोटर कन्ट्रोल बोर्ड दाहिनी ओर की दीवार से एक मीटर की दूरी पर है। |
10 | |
| Q. | LO | Questions | Marks |
|---|---|---|---|
| 5. | LO10 |
a)
Classify outdoor lighting systems with their merits and demerits.
बाहरी प्रकाश व्यवस्थाओं को उनके गुणों और दोषों के साथ वर्गीकृत करें। |
7 |
| LO14 |
b)
Draw arrangement used for electrical transmission lines and name its various parts.
विद्युत संचरण लाइन के रेट व्यवस्था के चित्र बनाइए एवं इसके प्रत्येक अवयव के नाम दर्शाइए। |
3 | |
OR/अथवा |
|||
| LO10 |
a)
Write and explain the steps considered for the energy conservation in street lighting system.
स्ट्रीट लाइटिंग प्रणाली में ऊर्जा संरक्षण के लिए किए जाने वाले चरणों को लिखिए और समझाइए। |
7 | |
| Q. | LO | Questions | Marks |
|---|---|---|---|
| LO14 |
b)
Write short note on selection of wires and power cables.
तारों और पॉवर केबल्स के चयन पर संक्षिप्त टिप्पणी लिखें। |
3 | |
| 6. | LO13 |
a)
Estimate the material required for 440 V over-head distribution new line of 3 km length, considering span to be 50 m. Draw a neat sketch of one span of the line showing various components.
3 किमी. लम्बी 440 V शिरोपरि वितरण नई लाइन के लिए आवश्यक सामग्री का प्राक्कलन तैयार कीजिए जबकि स्पान 50 मी. माना गया है। लाइन के एक स्पान का चित्र विभिन्न अवयवों को दर्शाते हुए बनाइए। |
10 |
OR/अथवा |
|||
| LO13 |
a)
Describe the merits and demerits of overhead and underground distribution line.
ओवरहेड और भूमिगत वितरण लाइन के गुण और दोषों का वर्णन करें। |
5 | |
| LO13 |
b)
Classify the various types of substations.
विभिन्न प्रकार के सबस्टेशनों को वर्गीकृत कीजिए। |
5 | |
| 7. | LO14 |
a)
Prepare an estimate for 11/0.4 kV, 100 kVA pole mounted substation.
एक 11/0.4 kV, 100 kVA पोल स्थापित उपकेन्द्र के लिए प्राक्कलन तैयार कीजिए। |
10 |
| Q. | LO | Questions | Marks |
|---|---|---|---|
OR/अथवा |
|||
| LO14 |
a)
Prepare an estimate for 33/0.4 kV, 1000 kVA pole mounted substation.
एक 33/0.4 kV, 1000 kVA पोल स्थापित उपकेन्द्र के लिए प्राक्कलन तैयार कीजिए। |
10 | |