Save as PDF

Opens your browser print dialog — select "Save as PDF" to download.

S/2025/7373
Total Pages : 4

Fourth Semester

Civil Engineering/CTM

Scheme OCBC July 2022

ADVANCED SURVEYING

Time : Three Hours

Maximum Marks : 70

Note : i) Attempt total six questions. Question No. 1 (Objective type) is compulsory. From the remaining questions attempt any five.

कुल छः प्रश्न हल कीजिए। प्रश्न क्रमांक 1 (वस्तुनिष्ठ प्रकार का) अनिवार्य है। शेष प्रश्नों में से किन्हीं पाँच को हल कीजिए।

ii) In case of any doubt or dispute, the English version question should be treated as final.

किसी भी प्रकार के संदेह अथवा विवाद की स्थिति में अंग्रेजी भाषा के प्रश्न को अंतिम माना जायेगा।

1.

Choose the correct answer. 2 each

सही उत्तर का चयन कीजिए।

i)

Most suitable methods of plane table survey to locate the details of a college campus.

कॉलेज परिसर के विवरण प्रदर्शित करने हेतु पटल सर्वेक्षण की सबसे उपयुक्त विधि होगी

  1. Radiation method (अ) विकिरण विधि
  2. Intersection method (ब) प्रतिच्छेदन विधि
  3. Traversing method (स) माला रेखण विधि
  4. Resection method (द) अन्तरच्छेदन विधि
ii)

The size of theodolite is defined by

थोडोलाइट के आकार को परिभाषित करता है

  1. Dia. of lower plate (अ) निचली प्लेट का व्यास
  2. Dia. of upper plate (ब) ऊपरी प्लेट का व्यास
  3. Length of telescope (स) दूरबीन की लंबाई
  4. Dia. of vertical circle (द) ऊर्ध्वाधर वृत्त का व्यास
iii)

Formula for calculating long chord of a simple circular curve is

साधारण वक्र की दीर्घ जीवा ज्ञात करने का सूत्र है

  1. R sin Δ/2 (अ) R sin Δ/2
  2. 2R sin Δ/2 (ब) 2R sin Δ/2
  3. R sin Δ (स) R sin Δ
  4. 2R sin Δ (द) 2R sin Δ
iv)

Number of sub chords in a simple circular curve are

एक साधारण वृत्तीय वक्र में उपजीवा की संख्या होती है

  1. One (अ) एक
  2. Two (ब) दो
  3. Three (स) तीन
  4. Four (द) चार
v)

The multiplying constant of a tacheometer is generally

एक टेक्यौमीटर का गुणन स्थिरांक सामान्यत: होता है

  1. 00 (अ) 00
  2. 0.5 (ब) 0.5
  3. 01 (स) 01
  4. 100 (द) 100
2.
a)

Name the different accessories of plane table with their use. 6

प्लेन टेबल के सहायक उपकरणों के नाम उनके उपयोग सहित लिखिए।

b)

Describe intersection method of plane table survey. 6

पटल सर्वेक्षण की प्रतिच्छेदन विधि का वर्णन कीजिये।

3.
a)

What is face left and face right observation in theodolite and which errors are eliminated by these observations? 4

थोडोलाइट में बाँया फलन एवं दायाँ फलन प्रेक्षण क्या होते हैं, एवं इन प्रेक्षणों से कौनसी त्रुटियाँ दूर होती है?

b)

Describe the procedure of measuring horizontal angle by repetition method. 8

आवृति विधि से क्षैतिज कोण नापने की विधि का वर्णन कीजिये।

4.
a)

Explain Bowditch's rule and transit rule in theodolite traversing. 4

थोडोलाइट चक्रमण में बोडिच नियम एवं ट्रांजिट नियम को समझाइये।

b)

Calculate the latitude, departure and closing error for the following observations. 8

Diagram for Question

निम्नलिखित प्रेक्षणों के लिए अक्षांश, गुणांक एवं समापन त्रुटि की गणना कीजिए।

Diagram for Question
5.
a)

Explain the field method for determination of tacheometric constants. 5

टेक्यौमेट्रिक स्थिरांक ज्ञात करने की मैदानी विधि का वर्णन कीजिये।

b)

A tacheometer was set up at station P and following: 7

Reading were taken with staff held vertical at station Q

Diagram for Question

The instrument constants are 100 and 0.3. Find the horizontal distance PQ.

एक टेक्यौमीटर को स्टेशन P पर स्थापित कर एवं स्टेशन Q पर तलेक्षण गज ऊर्ध्वाधर रखकर निम्नलिखित पाठ्यांक लिए गये

Diagram for Question

उपकरण स्थिरांक का मान 100 एवं 0.3 है। दूरी PQ ज्ञात कीजिये।

6.
a)

Define degree of curve and derive its relation with radius of curve. 4

वक्रता अंश को परिभाषित कीजिये एवं इसका वक्र की त्रिज्या के साथ संबंध स्थापित कीजिये।

b)

If the radius of curve 220 meter, chainage of point of intersection 1800 m and angle of intersection 145° then calculate following element of a simple circular curve (peg interval is 20m) 8

यदि वक्र की त्रिज्या 220 मीटर, प्रतिच्छेदन बिंदु की जरीबी दूरी 1800 मीटर, तथा प्रतिच्छेदन कोण 145° हो तो एक साधारण वृत्तीय वक्र के निम्नलिखित अवयवों की गणना कीजिये। (पेग अंतराल 20 मी है)

  1. Tangent length i) स्पर्श ज्या लंबाई
  2. Length of curve ii) वक्र की लंबाई
  3. Long chord length iii) दीर्घ जीवा की लंबाई
  4. Chainage of point of commencement and point of tangency iv) वक्र के प्रारंभ एवं अंतिम बिंदु की जरीबी दूरी
7.
a)

Draw a neat sketch of simple circular curve, showing all elements on it. 6

सभी अवयवों को दर्शाते हुए एक साधारण वृत्तीय वक्र का स्वच्छ चित्र बनाइये।

b)

Write the advantages and disadvantages of plane table survey. 6

पटल सर्वेक्षण के लाभ एवं हानियाँ लिखिये।

8.
a)

Write a short note on following (Any three): 4 each

  1. EDM अ) EDM
  2. Total station ब) टोटल स्टेशन
  3. GPS स) GPS
  4. GIS द) GIS
  5. Remote sensing इ) दूर संवेदन